Electric Stove Repair: Quick Fixes & When to Call a Pro

If your electric stove refuses to heat or sparks when you turn a knob, you’re probably frustrated. The good news is many issues are simple to spot and even easier to fix. In this guide you’ll learn the most common problems, step‑by‑step DIY checks, and the signs that it’s time to call a professional from South Shields Appliance Repair Services.

Common Electric Stove Problems

First, understand what usually goes wrong. The most frequent culprits are:

  • Faulty heating element – the coil or ceramic that turns electric power into heat can burn out.
  • Broken thermostat or temperature sensor – it tells the stove when to stop heating.
  • Loose or damaged wiring – a wire that’s frayed or not connected properly can cause intermittent power.
  • Bad switch or control board – if the knobs don’t respond, the switch underneath may be shot.
  • Tripped circuit breaker or blown fuse – sometimes the whole stove just loses power.

Knowing which of these sounds like your issue helps you narrow down the fix.

DIY Steps You Can Try Safely

1. Check the power source. Pull the plug, wait a few seconds, and plug it back in. If other appliances work on the same outlet, the outlet is fine. If not, reset the breaker or replace a blown fuse.

2. Inspect the heating element. When the stove is cool, look for cracks, discoloration, or a broken coil. A quick visual check often tells you if the element needs swapping.

3. Test the element with a multimeter. Set the meter to ohms, touch the probes to the element’s terminals, and read the resistance. A healthy element usually reads between 10‑30 Ω. Anything wildly off means it’s dead.

4. Look at the thermostat. Some stoves have a removable thermostat under the burner. If it’s dusty or corroded, clean it with a soft brush. If the stove still won’t stop heating, the thermostat is probably bad.

5. Examine the wiring. Open the back panel (make sure the stove is unplugged!). Check for any wires that are loose, burnt, or have exposed copper. Tighten connections or replace damaged sections.

If any of these steps feel uncomfortable, stop and call a pro. Working with electricity can be risky, and a licensed technician can diagnose hidden faults without turning your kitchen into a hazard.

When you do call South Shields Appliance Repair Services, they’ll send a certified electrician who knows local regulations. They’ll test the stove with professional equipment, replace parts quickly, and give you a clear cost estimate before any work starts.

Most electric stove repairs cost between £80 and £150, depending on the part needed. Trying a simple element swap yourself can save you £30‑£50, but remember that a wrong part or a bad connection could cost more in the long run.

In short, start with power checks, visual inspections, and basic tests. If the problem persists, get a qualified technician involved. Quick, accurate repairs mean your stove is back to heating meals in no time, and you avoid costly damage later.

Got a stubborn stove that won’t cooperate? Give South Shields Appliance Repair Services a call. Their local expertise means fast response, fair pricing, and a job done right the first time.

  • January 28, 2025

Can You Fix an Electric Stove? Easy Repair Tips and Tricks

Can You Fix an Electric Stove? Easy Repair Tips and Tricks

Electric stoves are a staple in modern kitchens, but they can encounter issues over time. Discover whether an electric stove is repairable and learn useful tips to troubleshoot common problems such as temperature inconsistencies and faulty burners. Basic repairs may be manageable without professional help, saving you money and time. This article provides insight into the essential steps of identifying and fixing typical electric stove issues.